14 Hakam Ben Kaysan St.
0799 501472
Sat. - Thurs. 8:30 am - 5:00 pm
HomeSmart Sweeper

Smart Choice for your cleaning business

Simple, environmentally-friendly and quick.

As the SmartSweep does not have an engine or hydraulic or electric drives, it can be used on all types of lift trucks. The SmartSweep can be attached to all electric, diesel or LPG driven lift trucks. In less than one minute it can be attached to the forks of most forklifts. The cost of the SmartSweep is very low compared to a ‘traditional’ sweeper and is a much more cost-effective solution to keep your work areas clean and tidy.

Smart Sweeper

SmartSweep has been developed for indoor and outdoor use (in dry conditions) and has two pneumatic tires and a rubber support wheel. The unique design enables the SmartSweep to turn in a very small turning circle due to the rear support wheel. The sweeping part exists of two side brushes and one central main brush that has a total sweeping width of 1500mm. The main brush is 965mm wide and has a diameter of 305mm. It is made of 6 double rows of polypropylene mixed with steel wire, which guarantees a very high wear-resistance. The side brushes (diameter 45cm) are completely made of polypropylene.
The machine can sweep in the smallest angles and has a rubbish volume of 255 liters’. The built-in dust filter ensures the cleaning is virtually dust-free. A system has been developed, so that dust and collected dirt can quickly and efficiently be emptied in a dust container.

The sweeping part exists of two side brushes and one central main brush that has a total sweeping width of 1500mm. The main brush is 965mm wide and has a diameter of 305mm. It is made of 6 double rows of polypropylene mixed with steel wire, which guarantees a very high wear-resistance. The side brushes (diameter 45cm) are completely made of polypropylene.

Smart Sweeper
Use your forklift to sweep the warehouse

Massive sweeping jobs have never been easier! The Smart Sweep Forklift Mount Warehouse Broom sweep debris from warehouses, docks, parking lots, construction sites, and more. Designed for use with wet or dry material, the forklift sweeper can Squeegee water and even push snow. This low-maintenance broom attaches to lift trucks and have easily replaceable 8″ H bristles and a lightweight extruded aluminum frame. The forklift sweeper mounts to the lift truck using quick-tite fork pockets. No engine inside = no pollution 100% dust control: thanks to the vacuum created inside and filter, no dust escapes.

Smart Sweeper Technical Data
Easy installation : can be mounted in less than 1 minute
150cm sweep path : 2 heavy duty side brushes + 1 main broom
The brushes are mechanically driven by the wheels via flexible drive .
For Maximum efficiency , the sweeper should be driven at 3-5 km/h
Turns automatically around corners = very small radius
Can be emptied above or inside a skip
Cleanable filter
Fully tested and CE – certified
1 year guarantee
Cleaning width: 1524 mm
Main brush width: 965 mm
Main brush diameter: 305 mm
Material of main brush*: Mixed 6 double row polypropylene and wire

Side brush diameter: 458 mm
Material of side brush**: Polypropylene
Filter size: 550 x 635 mm
Waste collector capacity: 409 kg
Waste collector content: 255 liters
Pneumatic tires: 136 x 464 mm
Third support wheel: Rubber, diameter 200 mm
Fits max fork dimensions : (WxTxL): 125 x 90 x 1200 mm
Outside sweeper dimensions: (WxLxH): 1524 x 1749 x 936 mm
Weight: 380 kg
Centre of gravity: unloaded: 1010 mm
Centre of gravity: loaded: 1220 mm
Cannot be fitted on FEM B-type forks

SmartSweep in numbers

month
Warranty
litre
Waste Tank Capacity
min
Installation time
Km/h
Speed

The SmartSweep has been developed for indoor and outdoor use (in dry conditions) and has two pneumatic tires and a rubber support wheel. The unique design enables the SmartSweep to turn in a very small turning circle due to the rear support wheel. The machine can sweep in the smallest angles and has a rubbish volume of 255 liters’. The built-in dust filter ensures the cleaning is virtually dust-free. A system has been developed, so that dust and collected dirt can quickly and efficiently be emptied in a dust container.

Was established in 2007 to provide the best solution for a diverse range of material handling supply needs, safety products, and tools.
More Info
First Source Engineering ©2023, All Rights Reserved.I Powered by Webaxoo
First Source Engineering
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare